How to Break a WiFi Password Without Application Easily

How to Break a WiFi Password Without Application Easily – At present, internet data (smartphone data or WifiWiFi) has become a mandatory requirement. Because to open WhatsApp just needs an internet connection. But to connect to the internet, some costs must be incurred Naturally if many are looking for ways to break the WiFi password to get the internet for free.

Finding your WiFi access is now not difficult because, in almost every office, food stalls, cafes, restaurants, hotels, hospitals, supermarkets, and even roadside stalls already provide.

In a mall, almost every merchant who opens a store has its WiFi access. But of course, the entrance is not free, because you have to buy one of the products sold, then you will be given a WiFi password for access. If you want free, you can ask the kindness of your colleague who has excess data to share by utilizing the tethering method from the cellphone.

But did you know that we can easily connect data via mobile phones, modems, internet cable networks to broadband used by neighbors even without knowing the password?

You can hack WifiWiFi using applications that are widely available on Google Play. But even if you don’t use the app, there is still a way to break the accessible WifiWiFi that you can use to connect to the internet.

You can use these methods later to connect to both the cellphone and the laptop. For use on any cell, you do not need to root first, so this method is guaranteed safe.

How to Break a WiFi Password Without an Application

1. Use the IP Address Configuration

1. Use the IP Address Configuration

This method Is Most Commonly Used by WiFi password breakers that do not use the application. The trick is also quite easy and usually anti-fail. This method is used to break network passwords using modem routers, for example, Indihome and network @ wifi.id.

First of all, you have to enable WifiWiFi on your cellphone or laptop. After the WifiWiFi is active, you can certainly immediately see what hotspots are active around you. The most easily found and everywhere there is @ WifiWiFi.id, so this address is the most frequently hacked by hackers.

If you choose @ wifi.id, you must connect to this address first. Usually, after you make a connection, a pop-up will appear asking you to enter your username and password. At the same time, a Modify Network Configuration mode page will look.

This is where you can start fiddling with IP addresses from @ wifi.id. On this page, you have to change the IP Address, which is usually written 192.168.1.1 to 192.168.1.2. If so, enter the browser and write Http //: 192.168.1.254 in the address column at the top.

If you log out, you don’t need to be confused because this is what you’ve been waiting for. You just need to enter your username and password by selecting the word ADMIN or USER. The username and password must be the same, where if you choose the ADMIN username, then the password must also be ADMIN. And if you select a USER username, then the password must also be USER.

After that, enter the Settings section and look for WiFi to see the username and password. That’s where the username and password are used to register @ wifi.id, which was then connected to your gadget, and you just use it.

2. Use CMD (Command Prompt) on Desktop or Laptop

2. Use CMD (Command Prompt) on Desktop or Laptop

If you want to communicate via WifiWiFi when using a desktop or laptop, which can be used as a way to break into WifiWiFi that is easier than when using a cellphone. With a computer, you must also first activate WiFi mode to find the closest hotspot to you.

After that, you just run the CMD (Command Prompt) page by pressing the Windows key + R. After that, and you enter the word CMD may be in uppercase and lowercase letters, and press OK. A typical black background CMD page will appear.

Immediately, you enter the command by typing Netsh Wlan show profiles and press enter after that will appear the names of WiFi networks that have been connected to a laptop. After that, re-enter the command Netsh Wlan show profiles name (network name) key = clear.

Now, this is where the data from the network will finally appear, along with the password. You can find the password in ‘Key Content.’ After saving, of course, all you have to do is find a connection with a similar name and enter the password that was already known.

3. Access the ‘Network and Internet’ Menu

3. Access the 'Network and Internet' Menu

 

If you are using a desktop or laptop, there are also other ways you can break into a WiFi password by entering the ‘Network and Internet’ menu.

This menu can be found in the Control Panel. You can find the Control Panel menu by searching in the Start Menu or by right-clicking the wireless connection sign in the form of a signal, which is usually located in the lower right corner of the screen near the battery status, to enter the Open Network and Sharing Center menu.

If you open via Control Panel, look for the ‘Network and Internet’ menu. Then go to the ‘Network and Sharing Center’ list where you will be able to find out what networks have been connected to your laptop.

In a new window, you can see the ‘Manage Wireless Networks’ menu to find out the password from the WifiWiFi connected to your laptop. To find out, all you have to do is click on the network name that you want to see the password for.

After clicking, a new tab will appear whose contents are the status of the WiFi connection that you are currently using. Click the ‘wireless properties’ tab and select the ‘security’ tab on the right. Inside will appear details of WifiWiFi, such as security type, encryption type, and network security key.

Here the network security key is still unreadable dots, and to display the original character, you just have to check ‘show characters’ and view the password of the WifiWiFi you are using.

This trick is used to find out the WiFi password that is already connected to our laptop without us knowing in advance what the password is. Usually, our reason for finding out the password in this way is to be able to use it again to connect other devices that we want to activate the WifiWiFi, for example, your cellphone or tablet.

Leave a Reply

Your email address will not be published. Required fields are marked *